Table of Contents
Advertisement
2.5
Power Management
The Power Management menu
power-management feature.
The following screen shows the Power Management parameters and
their default settings:
Power Management Mode.................[Enabled ]
IDE Hard Disk Standby Timer.........[OFF ]
System Sleep Timer..................[OFF]
Sleep Mode........................[ ----- ]
Power Switch < 4 sec. ................[Power Off]
*ACPI BIOS.............................[Enabled]
System Wake-up event
Modem Ring Indicator................[Enabled ]
¯ = Move Highlight Bar,
The above parameters marked with '*' will
only appear if you access the advanced
configuration level in the Main Menu. Please
refer to section 2.1.1 for more information.
2.5.1
Power Management Mode
This parameter allows you to reduce power consumption. When this
parameter is set to
Enabled
system
timers.
Setting
power-management feature and all the timers.
2-26
lets you configure the system
Power Management
® ¬ = Change Setting, F1 = Help
, you can configure the IDE hard disk and
to
Disabled
Page 1/1
deactivates
the
User's Guide
Advertisement
Table of Contents
