(6) Monitor function
① The software version can be viewed with N01, N02, and N14
② Each part of the sewing machine during operation can be monitored with N03, N04, N05, N06, and N07.
③ Operation restrictions by grease-up error can be canceled with N15.
④ N21, N22, N23, N24 can be updated.
Item
N01 Main software version
N02 Panel software version
N03 Sewing machine speed
monitor
N04 Input value of pedal A/D
N05 Display of principal axis
angle
N06 Display of principal axis
angle
N07 Supply voltage A/D value
N14 ST software version
N15 Grease-up stich count
A
B
A
B
4) Hold down
⓬ for 3 seconds to display the memory switch.
5) Press
❻ in the state that the function setting No. A is blinking to select "N03 (N04, N05,
N06, N07)".
6)
Put the sewing machine in operation by pedal operation. Change in the contents on the display can be
viewed.
7) Press
⓬ to return the normal sewing state.
Level
Display before initial operation
U
Displays the main software version.
Displays the panel software version.
U
Measures the sewing machine speed
S
and displays it.
S
Displays the input value of pedal A/D.
S
S
Displays the A/D value of the supply
S
voltage.
Displays the version of the presser lifter
U
motor control software.
Displays the number of stiches when
S
greasing is necessary.
The counter can be cleared.
[1]
❻
1) Activate the memory switch in the user level.
⓬
2) Press
3) Press
[2] Operation state monitoring
❻
1) Activate the memory switch in the service level.
⓬
2)
3) Make the needle bar and presser lifter motor
– 86 –
Display after initial operation
→
→
→
→
Displays the angle when the up
stop position is zero degree.
Displays the angle when the down
stop position is zero degree.
→
→
→
Check of software version
(Refer to "4.-(2)-[1] User level".)
❻ in the state that the function
setting No. A is blinking to select "N01" (N02,
N03).
⓬ return the normal sewing state.
(Refer to "4.-(2)-[2] Service level".)
Press
⓬ to return the normal sewing
state.
conduct initial operation.
(The method of making them conduct initial
operation varies depending on the setting on P136.)