JUKI DDL-8000A Engineer's Manual page 37

Direct-drive, high-speed, automatic thread trimmer
Hide thumbs Also See for DDL-8000A:
Table of Contents

Advertisement

Adjustment Procedure
4) Cleaning of the oil filter
Clean the oil filter ❷ periodically (approximately once every three
months).
1. Let the sewing machine fall down.
2. Remove the pipe stop ❶ and then the thread waste attached to
the oil filter ❷.
(Cautions) Be careful that a lubrication pipe and so on are not
damaged at the time of maintenance of a filter.
Results of Improper Adjustment
○ If there is clogging in the oil filter ❶,
smooth lubrication cannot be main-
tained from the lubrication hole.
– 24 –

Advertisement

Table of Contents
loading

Table of Contents