Table of Contents
Advertisement
PRECAUTIONS TO BE TAKEN SO AS TO USE THE DDL-8000A
1. Neither open the pulley cover nor touch the parts inside the pulley cover with the power
remained on in order to prevent accidents due to electrical shock.
2. To avoid personal injury, never put your fingers under the needle when you turn ON the
power switch or operate the sewing machine.
3. To avoid personal injury, never put your fingers into the thread take-up cover while the sew-
ing machine is in operation.
4. To avoid personal injury, turn OFF the power switch when you tilt the machine head.
5. To avoid personal injury, be careful not to allow your fingers in the machine when tilting the
machine head.
6. Be sure to mount the machine head support bar on the machine table so that its height
from the table surface becomes 55 to 60 mm.
1. Do not operate the sewing machine with the pulley cover and the finger guard removed in
order to protect against personal injury.
2. Neither place fingers, hair and/or clothes nor put anything in the area near the thread take-
up lever while the sewing machine is in operation in order to protect against personal injury
due to entanglement.
3. Keep fingers away from the thread take-up cover and the needle when turning the power on
in order to protect fingers and hands against injury.
4. To avoid personal injury, turn OFF the power switch when you tilt the machine head.
5. The hook rotates at a high speed while the machine is in operation. To prevent possible
injury to hands, be sure to keep your hands away from the vicinity of the hook during oper-
ation. In addition, be sure to turn OFF the power to the machine when replacing the bobbin.
6. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the power
switch and ascertain that the sewing machine does not run even if the starting pedal is de-
pressed when performing such works as inspection or adjustment of the sewing machine,
cleaning, threading, replacing the needle, etc.
7. So as to avoid electrical shock hazards, do not operate the machine with the power supply
earth wire removed.
8. So as to avoid electrical shock hazards and accidents caused by damaged electrical com-
ponents, be sure to turn OFF the power switch before inserting/detaching the power plug.
9. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the power
switch when leaving the sewing machine table.
10. So as to avoid personal injuries caused by abrupt start of the machine, turn OFF the power
switch when the electricity fails.
11. To prevent fires, periodically draw out the power plug from the plug socket and clean the
root of the pins and the space between pins.
12. The motor does not produce noise while the machine is at rest. To avoid possible accidents
due to abrupt start of the machine, be sure to turn OFF the power to the machine.
13. Be careful of handling this product so as not to pour water or oil, shock by dropping, and
the like since this product is a precision instrument.
14. In a domestic environment this product may cause radio interference, in which case the
user may be required to make corrective actions.
SERIES MORE SAFELY
vii
Advertisement
Table of Contents
