(16) How to remove a panel
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
❶
❸
❸
❹
Rear cover
❷
❹
1. Remove the rear cover (six setscrews ❶ of the
cover).
2. Remove a cable clip band ❷ and lay the panel
cable ❸ into the arm.
3. Loosen the panel setscrew ❹. (Two setscrews for
the upper arm and one setscrew for the lower arm)
– 75 –