4 . Operation panel
(1) Function of panel key
❽
⓭
No.
❶
❷
❸
❹
❺
A
❻
B
❶
❷
❸
How long the key
must be pressed
Short time
Used to changing over the automatic reverse feed stitching at
the beginning of sewing to: Reverse feed stitching / Double
reverse feed stitching / Disable
Long time
Used to change over the thread clamp operation between enable
/ disable
Short time
Used to change over the automatic reverse feed stitching at the
end of sewing to: Reverse feed stitching / Double reverse feed
stitching / Disable
Long time
Used to change over the needle bar stop position at the time of
stopping the sewing machine between up and down
Short time
Used to set the type of stitching to free stitching
Long time
Used to change over the thread trimming operation between
enable / disable.
Short time
Used to set the type of stitching to overlapped stitching
Long time
Used to change over the lifting of the presser foot during sewing
between "automatically lift / not lift".
Short time
Used to carry out setting of the polygonal-shape stitching.
Long time
Used to changeover the automatic lifting of presser foot after
thread trimming between lift / not lift
Short time
Used to increase the maximum sewing speed
Long time
Used to decrease the maximum sewing speed
❼ -B
❼ -A
❻ -A
❹
❺
❾
Function
– 81 –
⓬
⓫
❻ -B
❿