Table of Contents
Advertisement
(5) Initialize
All the data (including the set data for F1 and F2 of the panel and polygonal-shape stitching data) other than
P72, P73, P123, J4 will be initialized.
1) Activate the memory switch No. P70.
(Refer to "4.-(3) Head selection" [Memory switch No. P70].)
2) Select a different head and select the head again.
Example) When two heads are selected
Change "2" to "3", press
(6) Memory switch data reset
Once the memory switch data that you arbitrarily changed is memorized, the memorized data can be
restored any number of times until initialization is conducted.
A
B
⓭
put back "3" to "2", and press
1) Activate the memory switch in the user level.
(Refer to "4.-(2)-[1] User level".)
⓬
2-1) Hold down
mode screen, and all the function setting data
can be memorized and "SAVE" is displayed on
the screen for a moment.
2-2) H old down
sewing state, the data initialization confirmation
screen is displayed.
⓫
❽
3)
Press
memorized in the step 2-1) is reset and the
normal sewing state is restored.
– 119 –
.
⓭ for 3 seconds on the
⓫ for 6 seconds in the normal
❽ , and the memory switch data
Advertisement
Table of Contents
