Table of Contents
Advertisement
Model
Item
No.
1
Max. sewing speed
2
Max. stitch length
3
Needle bar stroke
4
Take-up lever stroke
5
Thread trimming method
6
Shorter-thread remaining
function
7
Lower bobbin winder unit
8
Needle thread nipper
unit（NB type）
9
Needle thread tension
10
Presser foot pressure
11
Number of patterns
12
USB
LAN
13
Plate (needle bar)
Hook
Gearbox
14
Plate (needle bar)
Hook
15
Plate (needle bar)
Hook
Gearbox
16
Lifting amount of presser
17
Needle
18
From needle to ma-
chine arm (width)
From needle to ma-
chine arm (high)
Bed size
19
Machine head drive
20
Machine head weight
21
Power consumption
22
Working temperature and
humidity
23
Supply voltage and frequency
24
Noise
*1：Stitch length 0.00 to 4.00：5,000sti/min, stitch length 4.05 to 5.00：4,000sti/min
*2：Stitch length 0.00 to 4.00：4,500sti/min, stitch length 4.05 to 5.00：4,000sti/min
*3：JUKI New Defrix Oil No. 1 or JUKI CORPORATION GENUINE OIL.7 (equivalent to ISO VG7)
*5：Steady operation denotes the noise level produced when the machine is operated for 300 mm at a constant speed in the state
that straight sewing is performed and no other units are actuated.
*6：Attachment device operation denotes the noise level produced while sewing a standard pattern for 300 mm operating
automatic auto-back, thread trimmer, and needle thread clamp.
*7：The presence or absence of the shorter-thread remaining function denotes the presence or absence of the condensation
device.
When the shorter-thread remaining function is present, the condensation device is a standard item.
When the shorter-thread remaining function is absent, on the other hand, the condensation device is not a standard item.
The condensation device can be installed afterward.
DDL-8000AS-MS
Semi-dry for standard materi-
als
5000sti/min *1
30.7mm
110mm
Built-in the machine head (with bobbin thread holding plate)
(For the polygonal shape sewing, as many as 10 patterns can be registered.)
Grease lubrication
Grease lubrication+Special surface processing
Grease lubrication +
Special surface processing
JUKI Grease A
(Part No.: 40006323)
DB×1(#11)#9 to 18
1738 (Nm75) Nm65 to 110
DP×5(#11)#9 to 18
134（Nm75） Nm65 to 110
Compact AC servomotor：550W that is directly connected to the main shaft（direct-drive system）
Temperature: 5 °C to 35°C, humidity: 35% to 85% (No dew condensation permissible)
SMS ;- Equivalent continuous emission sound pressure level (L pA ) at the workstation:
A-weighted value of 78.7 dBA ; (Includes K pA = 2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
PSH ;- Equivalent continuous emission sound pressure level (L pA ) at the workstation:
A-weighted value of 77.5 dBA ; (Includes K pA = 2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204
GR2 at 4,000 sti/min.
DDL-8000AS-SH
Minute-quantity lubrication for
heavy-weight materials
4500sti/min *2
Difference of stitch length 5 mm
35mm
113mm
Double-edged rotary type
With *7
Electromagnetic
Spring type
Spring type
Sewing pattern : 99 patterns
Cycle sewing pattern : 9 patterns
Custom-pitch pattern 20 patterns
Condensation custom pattern 9 patterns
With
Without
Oil wick lubrication
Plunger pump type
Oil wick lubrication
With oil tank (capacity: 160 ml)
No.1 or 7 *3
No.1 or 7 *3
JUKI Grease A (product No.: 40006323)
By hand：5.5mm
Auto : 1st step 5.0mm
: 2nd step 8.5mm
DB×1(#21)#20 to 23
1738 （Nm130）Nm125 to 160
DP×5(#21)#20 to 23
134（Nm130） Nm125 to 160
303mm
137mm
178mm × 517mm
40.2kg
330VA
Rated voltage ±10%, 50/60Hz
– 2 –
DDL-8000AS-SJ
Minute-quantity lubrication for
heavy-weight materials
4500sti/min *2
35mm
113mm
Oil wick lubrication
Oil wick lubrication
No.1 or 7 *3
DB×1(#21)#20 to 23
1738 （Nm130）Nm125 to 160
DP×5(#21)#20 to 23
134（Nm130）Nm125 to 160
Advertisement
Table of Contents
