(15) Configuration and adjustment of the lubrication mechanism
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
③ Remove the nut ❹ from the oil quantity sensor and the oil tank lid ❺ , and then remove the oil quantity
sensor.
❺
④ Installation can be conducted by the reversed procedure.
Put the O-ring ❽ put the packing ❾ between the oil tank ❶ and oil tank lid ❺ , and fully tighten the oil
quantity sensor nut ❹ and oil tank lid ❺ .
(Caution) Make sure that there is no tilt clearance.
❺
Standard adjustment
– 74 –
❹
❹
❽
❾
❶