Add Cross Line; Start Recording - HikRobot ID6000 Series User Manual

8.3 Add Cross Line

During live view, you can add a cross line on the live view image to adjust the position of the
object in the view.
Click in live view window to add cross line, and click
window to set cross line parameters.

8.4 Start Recording

During live view, you can record video files and capture images continuously.
Note
Enabling acquisition is required before recording.
Click in live view window to start recording, and click the icon again to stop. You can also
click (beside
ID6000 Series Smart Code Reader User Manual
Figure 8-2 Enable Acquisition
Figure 8-3 Add Cross Line
), and then click
(beside
to capture images of the live view continuously.
64
) to open the editing