Table of Contents
Advertisement
5.1 Set PC Network
To ensure stable image transmission and normal communication between the PC and the camera
via client software, you need to set the PC network before using the client software.
Before You Start
For different Windows versions, the specific setting path and interface may differ. Please refer to
the actual condition.
Steps
1. Go to PC network settings page: Start → Control Panel → Network and Internet → Network
and Sharing Center → Change adapter settings.
2. Select NIC and set the IP obtainment mode.
Select Obtain an IP address automatically to get an IP address of the PC automatically.
Note
Enter ipconfig in Run window in your PC, and then you can view the PC's IP address.
Select Use the following IP address to set an IP address for the PC manually.
3. Set NIC property.
ID6000 Series Smart Code Reader User Manual
Chapter 5 Network Settings
Figure 5-1 Set PC Network
15
Advertisement
Table of Contents
Need help?
Do you have a question about the ID6000 Series and is the answer not in the manual?