HikRobot ID6000 Series User Manual page 28

You can set device parameters in device configuration area.
No.
1 Device Connection
2 Image Settings
3 Algorithm Settings
4 I/O Control Settings
5 Data Processing
6 Communication Settings
Configuration
7
Management
The device supports 3 types of modes, including Test, Normal, and Raw. You can select different
camera modes in live view window according to actual demands.
ID6000 Series Smart Code Reader User Manual
Figure 6-2 Device Configuration Area
Table 6-2 Description
Module Name
You can connect or disconnect device, modify device IP
address, view device information, etc.
You can set image parameters, light parameters, etc.
You can add different barcodes, set barcode number,
etc.
You can set parameters related with input and output.
You can set filter rule for output result.
You can select different communication protocols, and
set related parameters for output result.
You can save and load user parameters, and restart the
device.
19
Description