Raider RD-ECS22 User Manual page 17

Description of drawing on the second page:
1. On/Off Switch.
2. Power cord hook.
3. Rear handle.
4. Switch lock button.
5. Oil tank cap.
6. Front handle.
7. Chain brake lever / front hand guard.
8. Saw chain.
9. Guide bar.
10. Nose sprocket.
11. Chain tension adjustment screw.
12. Oil level indicator.
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these instructions in a safe place.
1.1. Safe operation of electric chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind
that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use
of the chain saw.
1.2. Workplace. Work area safety.
Keep your workplace tidy and ensure it is well lit.
Untidiness and insufficient illumination contribute to accidents especially when chain saws
are in use.
Keep children and bystanders away from the workplace.
Distraction may cause loss of control over the tool.
1.3. Safety when working with electricity.
1.3.1. Plug of the chain saw must be suitable for contact. In no case is allowed to modify the
structure of the plug. When working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
1.3.2. Keep chain saw from rain and moisture.
Infiltration of water into the chain saw increases the risk of electric shock.
1.3.3. Do not use a power cord for the purposes for which it is not provided, for example to
carry chain saw for cable or removing the plug from the outlet. Protect cords from heat, oil and
contact with sharp edges or mobile points of machines.
Damaged or twisted cables increase the risk of electric shock.
1.3.4. When you work with the chain saw outdoors, switch the machine only in installations
equipped with electric switch "Fi" RCD (Residual Current Device). RCD must be no more than
30 mA. Use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
1.3.5. If you operating with a chain saw in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Using the extension, designed for outdoor use reduces the risk of electric shock.
1.4. Personal safety.
Use safety equipment, such as work suit, protective glasses, protective shoes, protective
helmet, earmuffs, protection and leather gloves. Using safety equipment in appropriate
conditions reduces risk of body injury.
Do not overestimate your abilities. Stand firmly and keep your balance at all times.
It enables better control over the chain saw in unpredicted situations.
Do not wear loose clothing or jewellery. Keep your hair, clothes and gloves away from
17