To Change Knob Functions While Active Dsp Is Turned On - Casio Casiotone CT-S500 User Manual

To change knob functions while Active DSP is turned on

1.
Press ACTIVE DSP.
This enables Active DSP and displays the Active DSP screen.
• This causes the ACTIVE DSP LED to light.
2.
Press KNOB.
This displays the knob screen.
• While Active DSP is turned on, you can configure effect parameter settings in addition to the
functions assigned to the knobs.
3.
Change the knob function.
• For information about to do this, see
• If effect parameters are assigned to the knobs, you can select only one part that has a knob effect
applied.
• When Knob K1-K2 linking is turned on, the part to which the effect is applied is the same part for
Knob 1 and Knob 2. If you change the function of either Knob 1 or Knob 2, the unchanged knob will
have a different recommended function than the one whose function you changed.
• Changing the part to which knob effects are applied while effect parameters are assigned to knobs
causes the knob functions to become the recommended settings of the effect of the changed part.
• You can also display the knob screen by pressing MENU and then KNOB.
• If Active DSP Hold (page EN-105) is enabled, you can also display the dedicated Active DSP knob
setting screen by pressing the KNOB button on the Home Screen.
• The KNOB button may not be displayed on the home screen due to the Home Customization setting.
Applying the Effect You Want to a Tone (Active DSP)
"To change the knob
EN-104
function" (page EN-60).