Casio Casiotone CT-S500 User Manual page 246

Symptom
The pitch of the notes does not match
other accompanying instruments or
notes sound strange when played along
with other instruments.
The reverb of notes seems to change
suddenly.
Operation
Tone, rhythm, and other settings revert
to their initial defaults whenever I turn
on the Digital Keyboard.
Connecting to a computer
I can't send or receive MIDI data.
Required Action
• Check and adjust the transpose setting (page EN-89)
and tuning setting (page EN-90).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• Check and adjust the reverb setting (page EN-65).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
Turning power off and then back on again initializes
Digital Keyboard settings (page EN-26). Settings are not
initialized if MY SETUP power on recall is enabled. You
can save settings to MY SETUP (page EN-106) or
registration memory (page EN-136).
• Check to make sure that the USB cable is connected
to the Digital Keyboard and your computer, and that
the correct device is selected with your computer's
music software (page EN-231).
• Turn off the Digital Keyboard and then exit the music
software on your computer. Next, turn the Digital
Keyboard back on and then restart the music
software on your computer.
EN-245
Reference