Casio Casiotone CT-S500 User Manual page 292

DSP Module
Indicator Parameter Name

Tremolo
Rate LFO Rate
Depth LFO Depth
Waveform LFO Waveform
WetLevel Wet Level
DryLevel Dry Level

Auto Pan
Rate LFO Rate
Depth LFO Depth
Waveform LFO Waveform
Manual Manual
WetLevel Wet Level
DryLevel Dry Level

Compressor
Attack Attack
Release Release
Ratio Ratio
WetLevel Wet Level
DryLevel Dry Level
Description
Uses an LFO to shift the volume of the input signal.
Adjusts the LFO rate.
Adjusts the LFO depth.
Selects the LFO waveform.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Uses an LFO to shift the phase of the input signal.
Adjusts the LFO rate.
Adjusts the LFO depth.
Selects the LFO waveform.
Adjusts the pan (stereo position). –64 is full left, 0 is
center, and +63 is full right.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Compresses the input signal and suppresses level variation.
Adjusts the time until compression goes into effect.
A smaller value causes prompt compressor
operation, which suppresses the attack of the input
signal. A larger values delays compressor operation,
which causes the attack of the input signal to be
output as-is.
Adjusts the time until compression is released after
the input signal drops below a prescribed level.
When an attack feeling is desired (no compression
at the onset of the sound), set this parameter to as
low a value as possible. To have compression
applied at all times, set a high value.
Adjusts the compression ratio of the audio signal.
Adjusts the level of the effect sound. Output volume
changes in accordance with the Ratio setting and
the characteristics of the input tone.
Adjusts the level of the direct sound.
EN-291
Reference
Settings
000 to 127
000 to 127
Sine, Triangle,
Trapzoid
000 to 127
000 to 127
000 to 127
000 to 127
Sine, Triangle,
Trapzoid
–64 to 00 to 63
000 to 127
000 to 127
000 to 127
000 to 127
1:1, 2:1, 4:1, 8:1,
16:1, 32:1, Inf:1
000 to 127
000 to 127