Program Change; Pitch Bend - Casio CTK-531 User Manual

What is MIDI?
MIDI Connections
MiDLIN | MiOt OUT
Nssemicraas
MIDI Channels
MIDI allows von to send the data for multiple parts at the same time,
with each part being sent over a separate MIDI channel, There are Le
MIDI channels, numbered I through 16, and MIDI channel data
is
always pluded whenever vou exchange data (key press etc.)
Both the sending machine and the receiving machine must be set to
the same channel for the receiving unit to correctly receive and play
data. ff the receiving machine is set to Channe} 2, for example, it re
ves any MID!
Channel 2 data, and all other channeis are ignored
card, tressages received over MIDI
Channels 1,
3
be used for multi-timbre piay of up to five different i n
nd volume settings for these five channels
an external device
and 10¢
strument parts. The tone
must be controlled by +
When sending operation of this kevboard to an external device,
nel 1 should
the MIDI send
channel.
ssages sent fro:
r© selected
General MIDI
Gener
gardiess of manufacturer. General MIDI specifies
numbering, drain sounds, and available MIDI channels for aif sound
sources. This standard makes it possible for all MIDI equipment te
produce the same nuances when playing General MDL data, re
gardiess of the manufacturer of the sound source,
HNOTES&
Messages
NOTE ON/OFF
ENOTE#
PROGRAM CHANGE
> data within the range of 0 to 127
3307.
ive tone data within the range of 0 to 125
rec
PITCH BEND
This message carries pitch bend information for smo
pitch upwards or downwards during keypoard piay. This kes
daes not ser
a, but is can receive such data