Casio Casiotone CT-S500 User Manual page 236

● To connect an external device to the LINE OUT jack
You can use a commercially available connecting cable for connection.
(Standard jack (6.3mm))
• When connected with an audio device (Figure
LINE OUT R (right) is the right channel and LINE OUT L/MONO (left) is the left channel.
Use a commercially available connection cable for connection as shown in Figure
you should set the input selector of the audio equipment to the jack where the Digital Keyboard is
connected (AUX IN, etc.)
• When connected with a music amplifier (Figure
Connecting to the LINE OUT L/MONO jack only outputs a mixture of both channels. Use a
commercially available connection cable as shown in Figure
■ Speaker Audio Output
If you want to disable sound output from the Digital Keyboard speaker while using the LINE OUT jack,
use the procedure under
Use the procedure under
PHONES connected" setting to "On".
• If "Off" is selected for the "Speaker" setting, nothing will be output from the speaker of the Digital
Keyboard even if "On" is selected for the "Speaker enabled when PHONES connected" setting.
• Selecting "Off" for the "Speaker" setting turns off the surround function.
B
LINE OUT R jacks
"Configuring Settings" (page EN-196) to change the "Speaker" setting to "Off".
"Configuring Settings" (page EN-196) to change the "Speaker enabled when
Audio amplifier AUX IN jacks, etc.
Pin plugs
RIGHT (Red)
LEFT (White)
LINE OUT L/MONO jacks
(Standard jack (6.3mm))
Standard plug (6.3mm)

)

)

EN-235
Connecting with External Devices
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2

.
. Normally,