To Change The Part Where The Effect Is Applied - Casio Casiotone CT-S500 User Manual

To change the part where the effect is applied

1.
Press ACTIVE DSP.
This turns on Active DSP and displays the Active DSP screen.
• This causes the ACTIVE DSP LED to light.
2.
Press ACT PART.
This displays the Active DSP part setting screen.
• On this screen as well, you can press CHG PART to select the part whose effect you want to
change the effect, or you can turn a dial to change the effect applied to the part.
3.
Press UPPER1, UPPER2, or LOWER to select the parts to which you want to
apply the effect. This causes the selected part indicators ("U1", "U2", "L") to
appear in the lower right of the display.
• Effects can be applied to up to two parts at the same time.
Applying the Effect You Want to a Tone (Active DSP)
EN-101