Casio Casiotone CT-S500 User Manual page 199

Function Name
Tuning
Surround
AUDIO IN center cancel
MIDI OUT Channel
UPPER1
MIDI OUT Channel
UPPER2
MIDI OUT Channel
LOWER
Local Control
MIDI Sync Mode
Auto Power Off
Battery type
Display Contrast
Button long-press time
Speaker
Speaker enabled when
PHONES connected
B
Description
Can be used to fine tune the
overall pitch by changing the
frequency of A4 in 0.1Hz units.
Can be used to create a more
expansive sound.
Can be used to cancel the
center part of audio input using
the AUDIO IN jack or Bluetooth
audio.
Can be used to change the
channel of MIDI messages that
are MIDI output by UPPER1
play.
Can be used to change the
channel of MIDI messages that
are MIDI output by UPPER2
play.
Can be used to change the
channel of MIDI messages that
are MIDI output by LOWER play.
Selecting "Off" disables output of
sound when something is played
on the Digital Keyboard.
You can synchronize the tempo
with an external MIDI device or
music software running on your
computer.
Can be used to enable/disable
Auto Power Off.
Can be used to specify the type
of batteries being used.
Can be used to adjust display
contrast.
Can be used to adjust the button
long-press time.
You can disable speaker output. Speaker
With this setting, you can
continue sound output from the
speaker when something is
connected to the PHONES jack.
EN-198
Display Name
Tuning 415.5Hz to 440.0Hz
to 465.9Hz
(Initial Default:
440.0)
Surround Off, On
(Initial Default: Off)
Audio In Center Off, On
Cancel (Initial Default: Off)
MIDI Out Ch Off, 1 to 16
Upper1 (Initial Default: 1)
MIDI Out Ch Off, 1 to 16
Upper2 (Initial Default: 2)
MIDI Out Ch Off, 1 to 16
Lower (Initial Default: 3)
Local Control Off, On
(Initial Default: On)
MIDI Sync Mode Off, Master, Slave
(Initial Default: Off)
Auto Power Off Off, On
(Initial Default: On)
Battery Alkaline, Ni-MH
(Initial Default:
Alkaline)
LCD Contrast 1 to 12
(Initial Default: 7)
Button Long Short, Normal,
Press Time Long
(Initial Default:
Normal)
Off, On
(Initial Default: On)
Phone Speaker Off, On
(Initial Default: Off)
Configuring Settings
Setting