Casio Casiotone CT-S500 User Manual page 237

■ Sounding Input From an External Device on This Digital Keyboard
Connection requires commercially available connecting cords, supplied by you.
The connecting cord should have a stereo mini plug on one end for connection to this Digital Keyboard
and a plug that matches the configuration of the output jack of external device on the other end.
When sounding input from an external device with this Digital Keyboard, use the external device
controls to adjust the volume level. In this case, you cannot adjust the volume level on this Digital
Keyboard.
• Turn off this Digital Keyboard before connecting. Before turning power on or off, turn down
the volume level of the Digital Keyboard and external devices.
• After connecting, turn on the external device and then this Digital Keyboard.
• If external device notes sounded by this Digital Keyboard are distorted, lower the external
device's volume level.
• If the volume level of the external device notes sounds by this Digital Keyboard is lower than
the volume level of the notes you are playing on the keyboard, adjust the volume balance of
the Digital Keyboard. See
Rhythm Play (Balance)" on page EN-86.
• Setting the volume level of the external device too high can cause Digital Keyboard power to
turn off in order to protect it against damage. If this happens, lower the volume of the external
device.
• The end of the connecting cord you connect to the Digital Keyboard must have a 3.5mm
3-pole stereo mini plug. Use of other types of plugs is not supported.
Portable audio player, etc.
■ AUDIO IN center cancel (Vocal Cut)
Enabling Vocal Cut removes (mutes or minimizes) the vocal part from the AUDIO IN jack input or the
input using Bluetooth audio. Note that this function cancels the sound in the center position of the
audio, which may (depending on how the original audio was mixed) end up canceling something else
other than the vocal part. How vocal cut is performed depends on the sound being input.
For information about how to configure settings, see the
• Digital Keyboard built-in effects (reverb, other) are not applied to AUDIO IN jack or Bluetooth audio
input.
"Changing the Volume Balance Between Keyboard Play and
Stereo mini plug
AUDIO IN jack (3.5mm stereo mini jack)
EN-236
Connecting with External Devices
"Setting Item List" (page EN-197).