Casio Casiotone CT-S500 User Manual page 245

Symptom
Nothing happens when I start an Auto
Accompaniment.
Nothing happens when I start playing a
song's Auto Accompaniment.
The metronome does not sound.
Notes keep sounding, without stopping.
Some notes are cut off while they are
playing.
The volume level or tone setting I
configured has changed.
With certain volume levels and tones,
the sound of notes played in one
keyboard range will sound different from
those played in another keyboard
range.
With some tones, octaves do not
change at the far ends of the keyboard.
Required Action
• With rhythms 234 to 243, nothing sounds if you do not
play a chord on the keyboard. Try playing a chord
(page EN-126).
• Check and adjust the rhythm volume level (page
EN-117).
• If you have not saved user rhythms to rhythm
numbers 244 to 293, nothing will sound if you select
one of these rhythms and press a (page EN-135).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• It takes a little time after you press the button until the
song starts to play. Wait for the song to start.
• Check and adjust the song volume level (page
EN-152).
• If the song data is not saved, pressing a does not
start the song (page EN-149).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• Check and adjust the metronome volume level (page
EN-33).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• Replace the batteries with new ones. Or use AC
adaptor power (page EN-8).
This happens whenever the number of notes being
sounded exceeds the maximum polyphony value of 64
(32 for some tones). It does not indicate malfunction.
• Adjust the volume level (page EN-28).
• Turn the Digital Keyboard off and then back on (page
EN-26). This will initialize settings. Settings are not
initialized if MY SETUP power on recall is enabled.
• Replace the batteries with new ones. Or use AC
adaptor power (page EN-8).
This is due to system limitations and does not indicate
malfunction.
This is due to system limitations, and does not indicate
malfunction.
EN-244
Reference