Casio Casiotone CT-S500 User Manual page 67

4.
Rotate the dial to select the reverb type.
The following shows the available reverb type settings.
Reverb Type
Off
Reverb Recommended for Each Tone
Room 1 to 5
Large Room 1 or 2
Hall 1 to 6
Stadium 1 to 3
Plate 1 or 2
Delay
Pan Delay
Long Delay 1, 2
Church
Cathedral
• After you rotate the dial once to select a reverb type, you can change the selection further using
– and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
5.
To exit the setting operation, press EXIT.
• You can also use the knobs to adjust how reverb is applied to a tone. For more information, see
"Using the Knobs to Change the
Display Name
Off
Tone
Room 1 to 5
Large Room 1 or 2
Hall 1 to 6
Stadium 1 to 3
Plate 1 or 2
Delay
Pan Delay
Long Delay 1, 2
Church
Cathedral
Sound" (page EN-58).
EN-66
Controlling the Sound of a Performance