Dsp Effect List - Casio Casiotone CT-S500 User Manual

DSP Effect List

DSP Module List
Module
DSP Module Name
Number

Mono 1-Band EQ

Mono 2-Band EQ

Mono 3-Band EQ

Stereo 1-Band EQ

Stereo 2-Band EQ

Stereo 3-Band EQ

Tone Control

Tremolo

Auto Pan

Compressor

Limiter

Enhancer

Phaser

Chorus

Flanger

Rotary

Drive Rotary

Pitch Shifter

Ring Modulator

Reflection

Delay

Piano Effect

LFO Wah

Auto Wah
Indicator
MONO 1EQ This is a single-band monaural equalizer.
MONO 2EQ This is a dual-band monaural equalizer.
MONO 3EQ This is a three-band monaural equalizer.
STREO 1EQ This is a single-band stereo equalizer.
STREO 2EQ This is a dual-band stereo equalizer.
STREO 3EQ This is a three-band stereo equalizer.
TONE CTRL Monaural tone control that adjusts low, mid, and high
frequencies.
TREMOLO Uses an LFO to shift the volume of the input signal.
AUTO PAN Uses an LFO to shift the phase of the input signal.
COMPRESS Compresses the input signal and suppresses level variation.
LIMITER Limits the input signal level so it does not rise above a preset
level.
ENHANCER Enhances the profiles of the low range and high range of the
input signal.
PHASER Produces a distinctive pulsating, broad sound by using an
LFO to change the phase of the input signal and then mixes
it with the original input signal.
CHORUS Gives notes depth and breadth.
FLANGER Applies wildly pulsating and metallic reverberation to notes.
Enables selection of the LFO waveform.
ROTARY This effect is a rotary speaker simulator.
DRIVE ROT A rotary speaker simulator that makes overdrive possible.
PITCH This effect transforms the pitch of the input signal.
RING MOD Multiplies the input signal with an internal oscillator signal to
create a metallic sound.
REFLECT An effect that simulates the initial reflection of reverberation.
Applies acoustic ambiance and presence to notes.
DELAY Delays the input signal and feeds it back to create a
repeating effect.
PIANO An effect suited to acoustic piano play.
LFO WAH "Wah" effect that can automatically affect the frequency
using an LFO.
AUTO WAH "Wah" effect that can automatically shift the frequency
according to the input signal level.
EN-287
Description
Reference