Casio Casiotone CT-S500 User Manual page 63

Setting
Vibrato Rate
Vibrato Depth
Vibrato Delay
Part Volume
Pan
Reverb Send
Chorus Send
Delay Send
Equalizer Low Gain
Equalizer Midrange 1
Gain
Equalizer Midrange 2
Gain
Equalizer High Gain
Equalizer Input Level
Equalizer Output Level EQ Output Level
• After you rotate the dial to select a value, you can change the selection further using – and +.
• To return the setting to its initial default, press – and + at the same time.
• To go back to the previous screen, press BACK.
5.
Press BACK to return to the knob screen.
6.
To exit the setting operation, press EXIT.
• Certain settings may result in strong distortion.
Indicator
Vibrato Rate Adjusts the speed of vibrato of a tone.
Vibrato Depth Specifies the depth of vibrato of a tone.
Vibrato Delay Adjusts the time until the vibrato of the tone starts
after a note is sounded.
Part Volume Adjusts the volume level of a part.
Pan Adjusts the stereo center of the sound. 0 indicates
the middle, while a smaller value shifts to the left
and a larger value shifts to the right.
Reverb Send Specifies how much reverb is applied for each tone.
Chorus Send Specifies how much chorus is applied for each tone.
Delay Send Adjusts how delay is applied to a tone.
EQ Low Gain Adjusts the amplification in each equalizer range.
EQ Mid1 Gain
EQ Mid2 Gain
EQ High Gain
EQ Input Level Adjusts the equalizer input level.
Adjusts the equalizer output level.
EN-62
Controlling the Sound of a Performance
Description