Rotax 125 DD2 MAX EVO Operator's Manual page 38

Figure 3.13: Gear cover
Figure 3.14: Gear ratio
3
Page 18
Edition: March 01 2021
Operators Manual
Step Procedure
4 Remove the primary drive gear (pos. 4) and secondary gear (pos. 5) and fit
the gear pair of your choice.
NOTE
At re-assembly, proceed in reverse sequence. Tighten the screws to
the following torque settings:
M6: 10 Nm (88 lbf. in.) / M8: 22 Nm (195 lbf. in.)
BRP-Rotax
Effectivity: 125 MAX DD2 evo