Page 1
Place the artery-mark on the cuff over your artery. www.microlife.com Fit the cuff closely, but not too tight. Position the cuff 2-3 cm above your elbow. Microlife BP B2 Plus Keep your arm still and do not speak during the measurement. IB BP B2 Plus_3UG1-3F EN_4821...
Page 2
Microlife BP B2 Plus Before each measurement Microlife BP B2 Plus Guarantee Card Microlife BP B2 Plus Name of Purchaser Serial Number Date of Purchase Avoid activity and relax for 5-10 min. Specialist Dealer Measure before medication intake.
Page 3
* This device uses the same measuring technology as the award winning «BP 3BTO-A» model tested according to the British and Irish Hypertension Society (BIHS) protocol.
6. Using a Mains Adapter Pre-shaped cuffs are optionally available. Only use Microlife cuffs. 7. Error Messages Contact your local Microlife Service if the enclosed cuff 8 does not 8. Safety, Care, Accuracy Test and Disposal fit. • Safety and protection Connect the cuff to the device by inserting the cuff connector 9 into •...
5. When the correct pressure is reached, the pumping stops and the pressure falls gradually. If the required pressure was not reached, the device will automatically pump some more air into the cuff. 6. During the measurement, the pulse indicator AQ flashes in the display. BP B2 Plus...
How do I evaluate my blood pressure? 4. Data Memory The triangle on the left-hand edge of the display AO points at the This device automatically stores the last 60 measurement values. range within which the measured blood pressure value lies. The Viewing the stored values value is either within the optimum (white), elevated (hatched gray) or high (black) range.
Page 8
* Please immediately consult your doctor, if this or any other problem occurs repeatedly.