Table of Contents
Advertisement
Back Light
This setting allows for selection of the amount of time the backlight on the COLORdash Par-H12 IP's
display stays on after the last button is pressed on the control panel.
1.
Go to the Back Light main level.
2.
Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
Fixture Hours/Software Version
This option displays the total number of hours the product has run, the UID (Universal Identification) code,
the battery level and the installed software version.
1.
Go to the Information main level.
2.
Press <ENTER> to view.
Factory Reset
This option resets all product settings to the original factory setting.
1.
Go to the Factory Reset main level.
2.
Select Yes.
Page 18 of 22
COLORdash Par-H12 IP User Manual Rev. 1
O
PERATION
Advertisement
Table of Contents
