Chauvet Hurricane Haze 2D User Manual
Hide thumbs Also See for Hurricane Haze 2D:

Advertisement

User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Chauvet Hurricane Haze 2D

  • Page 1 User Manual...
  • Page 2: Table Of Contents

    Table of Contents 1. Before You Begin ................3 What Is Included ................... 3 Unpacking Instructions .................. 3 Claims ......................3 Text Conventions ..................3 Icons ......................3 Document Information ................... 3 Product at a Glance ..................4 Safety Notes ....................4 2.
  • Page 3: Before You Begin

    If the container or the material inside the container (the product and included accessories) appear damaged from shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not CHAUVET®. Failure to do so in a timely manner may invalidate your claim with the carrier. In addition, keep the container and all the packing material for inspection.
  • Page 4: Product At A Glance

    · Do not use for space heating purposes. FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Hurricane™ Haze 2D. Make sure you use FCQ regularly to increase the life of your product. Page 4 of 16...
  • Page 5: Introduction

    Introduction Product Overview Control Board DMX In DMX Out Wired Remote Power Switch Fuseholder Power In Rubber feet (4) Fluid & wired remote storage access panel Hurricane™ Haze 2D User Manual Rev. 10 Page 5 of 16...
  • Page 6: Product Dimensions

    Product Dimensions Page 6 of 16 Hurricane™ Haze 2D User Manual Rev. 10...
  • Page 7: Setup

    Setup AC Power This product can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC, 50 Hz depending on the model. To determine the power requirements for a particular product, see the label affixed to the back plate of the product or refer to the product’s specifications chart.
  • Page 8: Mounting

    Mounting Orientation The Hurricane™ Haze 2D may be mounted in any position provided there is adequate room for ventilation around it. Rigging Be sure that the structure or surface onto which you are mounting this product can support its weight. Please see the Technical Specifications section of this manual for weight information.
  • Page 9: Operation

    Operation Control To access the control panel functions, use the three buttons located underneath the display. Panel Operation Button Function Press to scroll through the <MENU> operating modes <UP> Press to find a higher value <DOWN> Press to find a lower value Important note regarding the priority level for the three types of methods used to control the operation of your Hurricane™...
  • Page 10: Wired Timer Remote Operation

    Wired Timer Important: Using the Control Board, set the Fan and Haze output to 0. You can then connect and operate the included wired remote with the Hurricane™ Haze 2D. Remote Operation The wired timer controller allows you to automatically trigger fog output by setting interval and duration times.
  • Page 11: Menu Map

    Menu Map Mode Programming Steps Description DMX Mode d*** 001–512 Selects the DMX starting address Haze Volume h001–h005 Low–high Manual Mode Blower Speed f001–f005 Low–high Configuration Set this product in DMX mode to control it with a DMX controller. · (DMX) Connect this product to a suitable power outlet.
  • Page 12: Configuration (Standalone Mode)

    Configuration Set this product in one of the standalone modes to control it without a DMX controller. Connect this product to a suitable power outlet. (Standalone Turn this product on. Mode) Manual Mode Never connect a product that is operating in any standalone mode, whether Static, Automatic, or Sound to a DMX string connected to a DMX controller.
  • Page 13: Technical Information

    Cleaning is now complete. Refill with haze liquid. Run the machine briefly to clear any cleaning solution from the pump and heater. Fog Cleaner Quart (FCQ) was specifically developed by Chauvet® to clean your Hurricane™ Haze 2D. Make sure you use FCQ regularly to increase the life of your product.
  • Page 14: General Troubleshooting

    Install an optically coupled DMX amplifier after unit #32 Terminator not connected Install a terminator, as indicated in the “DMX Primer” section. If you still experience problems after trying the solutions presented here, contact CHAUVET® Technical Support. Page 14 of 16 Hurricane™ Haze 2D User Manual Rev. 10...
  • Page 15: Returns

    Be prepared to provide the model number, serial number, and a brief description of the cause for the return. You must send the merchandise prepaid, in its original box, and with its original packing and accessories. CHAUVET® will not issue call tags.
  • Page 16: Technical Specifications

    Tank Capacity Fluid Consumption Operation 5 min 2.5 l 8.2 ml/min Fog output /min (m /min) 1,200 (34) Chauvet® Haze Fluid Approved Fluids (Gallon) Maximum External Temp. Cooling System Thermal 104 °F (40 °C) Convection I/O Connectors Connector Type Channel Range...

Table of Contents