Configuration Wizard; Adapter Selection; Physical View / Logical View; Events - NEC N8103-91 User Manual

112

2-7. Configuration Wizard

Use this wizard to configure a RAID using the HDDs connected to the disk array controller.
The detailed explanation of this feature is given in "Configuring Virtual Disk".

2-8. Adapter Selection

If several disk array controllers are installed in the server, you need to select an adapter
controlled by WebBIOS to configure each adapter. Clicking [Adapter Selection] on
WebBIOS top menu opens the [Adapter Selection] screen again.

2-9. Physical View / Logical View

If the virtual disk has been configured using the disk array controller, DG (disk group) is
displayed on WebBIOS top menu. Clicking [Physical View] displays information for HDDs
in DG. Clicking [Logical View] displays virtual disk in DG.

2-10. Events

The Events screen is used to confirm the system events.
The disk array controller does not support Events feature.
Notice