NEC N8103-91 User Manual page 146

126
35.
VD 0 is created in DG 0 as shown in the [Preview] screen below.
36.
After making sure that the VD is created correctly, click [Accept] at the lower right
of the screen.
37.
The confirmation message "Save this Configuration?" appears. Click "Yes" to
save the configuration.
38.
The confirmation message "Want to Initialize the New Virtual Disks?" appears.
Normally, select "Yes".
39.
"Virtual Disks" operation screen is displayed. If no other operation is required,
click [Home] at the lower left of the screen.
40.
The WebBIOS top menu is displayed. Virtual Disk you have created is displayed
in the lower right frame of the screen.