NEC N8103-91 User Manual page 99

1
Channel 1 (Ports 0 - 3)
These channels allow the disk array controller to be connected to SAS devices.
2
Channel 2 (Ports 4 - 7)
These channels allow the disk array controller to be connected to SAS devices.
3
HW label
Indicates the management revision of the disk array controller.
4
Memory connector
Used to connect a memory module or N8103-94 additional battery.
5
N code label
Indicates the N code of the disk array controller.
7
PCI connector (PCI Express)
The connector allows the disk array controller to be connected to a PCI slot (PCI Express)
in the server.
REV
XXX
N8103-91
79