Installing Additional Battery - NEC N8103-91 User Manual

82

5-2. Installing Additional Battery

To use the N8103-94 additional battery, remove the memory module from the disk array
controller, and install the additional battery instead.
Open the lever fixing the memory module.
13.
Remove the memory module.
14.
Insert the additional battery into the slot securely.
15.
Close the lever opened in Step 1 to fix the battery.
Memory (256 MB DIMM-II)
Notice
Tips
N8103-94 Additional DAC battery
For detailed installation procedure of additional battery, refer to the
"N8103-94 Additional Battery User's Guide".
To replace the additional battery with the memory module, take the same
procedure as above.