114
3. Configuring Virtual Disk
This section describes the procedures for configuration of VD (virtual disk) using
WebBIOS.
3-1. Configuration Wizard
When you click [Configuration Wizard] on WebBIOS top menu, the screen as shown below
appears. Select the relevant operation, and click [Next] at lower right of the screen.
Clear Configuration
New Configuration
Add Configuration
Allows you to clear existing configuration.
Clears the existing configuration and creates a new VD. If you
have any existing data in the earlier defined virtual disk, the data
will be lost.
Retains the old configuration and then adds new virtual disk.