Setting Up The Parent Unit - Angelcare AC527 User Manual

1- SETTING UP THE PARENT UNIT

1
3
2- SETTING UP THE SENSOR PAD
The Sensor Pad is designed to detect subtle baby movements on the surface of the
mattress.The alarm will only sound if NO movement is detected for 20 seconds.
3
1
2
Correct positioning
for slatted base
2
Charge the Parent
Unit 8 hours
prior to first use.
8H
Regular charging time
is 6 hours.
1. Use a coin to remove/replace
the battery cover and insert the
battery face with + face up.
2. Replace the battery cover, align
2 dots and click to secure.
3. Remove the mattress from
the crib, place Sensor Pad
- Angelcare® logo side up -
on base in approximate centre
of mattress, along the length.
It should be centred on the
hardboard if your crib requires
a hardboard support (see
'IMPORTANT' note below).
4. Replace the mattress.
E
N
5