Adding Accessories; Troubleshooting - Angelcare AC527 User Manual

ALERTS ICONS
1 1
1
Sensor Pad alert: If after 20 seconds there is
1
NO movement detected both the Parent Unit and
Nursery Unit speakers will emit loud consecutive
beeps - this is the movement alarm.
Sensor Pad is paused
2
Sensor Pad lost link: Parent Unit and Nursery
3
Unit speakers will emit loud consecutive beeps.
Note: Press any key to stop alarm and make the alert icon disappear.
In the case of a Sensor Pad alarm, the monitor will Pause the Sensor Pad. In Pause mode, the
movement detection feature is disabled. To reactivate the Sensor Pad, simply un-pause the
Sensor Pad into the first menu.

6- ADDING ACCESSORIES

Your Angelcare monitor allows you to add an additional Nursery Unit and Sensor Pad. Please contact
your local distributor to see what is available in your country.
IMPORTANT:
• When using two Nursery Units you will only be able to hear audio from one Nursery Unit at a
time (Nursery Unit sound transmitted is highlighted in the info bar). In split screen, the sound
transmitted from the Nursery Unit will be indicated on the screen by a speaker icon shown to
the right of the CAM icons.
• When using two Sensor Pads with one Monitor, it is recommended that each Sensor Pad is
located in separate rooms.

7- TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 8 hours before its first use.
• To maintain maximum battery life, it is recommended that you fully discharge your battery periodically. If your
Parent Unit is not in use, please turn it OFF.
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Nursery Unit to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Nursery Unit to see if you get sound.
• Charge the Parent Unit.
1
2 3
1 1
4 5
Sensor Pad battery is low: Parent Unit will
4
emit 3 consecutive beeps, every 5 seconds.
Parent Unit is out-of-range: Parent
5
Unit will emit 2 consecutive beeps, every
10 seconds.
Temperature is too cold: Parent Unit will
6
emit 3 consecutive beeps, every 5 seconds.
Temperature is too hot: Parent Unit will
7
emit 3 consecutive beeps, every 5 seconds.
1
6 7
11
E
N