Advertisement
Table of Contents
- 1 Table of Contents
- 2 Warnings
- 3 Setup Requirements
- 4 STEP 1 - Charging the Parent Unit (8 Hours)
- 5 STEP 2 - Positioning the Movement Sensor
- 6 STEP 3 - Setting up the Camera
- 7 STEP 4 - Getting to Know Your Monitor
- 8 STEP 5 - Activating and Deactivating Additional Functions
- 9 STEP 6 - Adding Accessories
- 10 Troubleshooting
- 11 Limited Warranty
- 12 Technical Specifications
- Download this manual
See also:
Manual
Advertisement
Table of Contents
Related Manuals for Angelcare AC417
Summary of Contents for Angelcare AC417
- Page 1 OWNER’S MANUAL Model AC410, AC510 Baby Video and Sound Monitor Model AC417, AC517 Baby Video, Sound and Movement Monitor...
-
Page 2: Table Of Contents
WARNING Adult assembly required. Keep small parts away from children when assembling. We, at Angelcare®, stand behind all of our products. If you are not completely satisfied or have any questions, United States and Canada: Please contact us at: angelcare@cdecinc.ca Other countries: Please contact your local distributor. -
Page 3: Warnings
Refer to your user manual for correct battery children (more than 1 installation. DO NOT short circuit supply terminals. meter away). NEVER use Only use the Angelcare provided power adapter Sensor Pad(s) without to charge the battery. Remove the battery from t h e... - Page 4 Angelcare® monitor and the alarm will not sound if it continues to detect any movement 16.10 If and when necessary, the batteries must other than your baby’s.
-
Page 5: Setup Requirements
Model AC410, AC510 SETUP REQUIREMENTS Baby Video and Sound Monitor Model AC417, AC517 INCLUDED: Baby Video, Sound and Movement Monitor Tabletop stand Camera Touch control parent unit... -
Page 6: Step 1 - Charging The Parent Unit (8 Hours)
(for flat micro USB cable) Flat micro USB cable Wireless movement sensor pad (for camera adapter) (only for Model AC417, AC517) STEP 1 - CHARGING THE PARENT UNIT (8 HOURS) Battery compartment lock 1) Unlock the battery compartment on the backside and remove the cover. - Page 7 PARENT UNIT: Power indicator Power On/Off Visual sound indicator Microphone Volume control +/- (on the side) Micro USB charging port (on the side) Folding stand (on backside) Rechargeable battery compartment (on backside) WARNING STRANGULATION HAZARD. Children have STRANGLED in cords: •...
-
Page 8: Step 2 - Positioning The Movement Sensor
STEP 2 - POSITIONING THE MOVEMENT SENSOR Note: If you have model AC410, AC510 (no Sensor Pad) you can skip to Page 2.1 - POWERING THE MOVEMENT SENSOR PAD 1) When using the Sensor Pad for the first time, you will need to insert the provided CR3032 battery. -
Page 9: Step 3 - Setting Up The Camera
IMPORTANT If your crib does not have a solid, stable surface for the Sensor Pad, you will need to place a hard support board (not included) underneath the sensor pad to ensure correct operation of the system. This hardboard support should be at least ¼” (6 mm) thick Hardboard and should have minimum dimensions of 13”... - Page 10 3.1 - CAMERA A) POWER ON/OFF B) Pause Sensor Pad C) Speaker D) Microphone E) Camera F) Room temperature display G) Micro USB charging port Front Side 1) Place the Camera at a minimum of 1 meter / 3 feet away from the crib. 2) Connect the USB plug to the Camera.
- Page 11 TURNING ON YOUR MONITOR 1) Press and hold the Parent Unit ON/OFF button for 2 seconds until LCD screen is turned ON. Angelcare’s logo will be shown for 1 second. 2) Slide the Camera ON/OFF switch to the ON position 3) The Parent Unit will display Video mode screen.
-
Page 12: Step 4 - Getting To Know Your Monitor
Select Camera Your Angelcare® monitor can be used with the preprogrammed factory settings or you can customize the settings to your preference. Your monitor is equipped with a touch screen. Just a tap anywhere on the screen will bring up the menu and feature selections. - Page 13 TO ACTIVATE THE SENSOR PAD: 1) Tap the screen anywhere to bring up the menu. 2) Tap the Settings Icon 3) Tap the Sensor Pad Icon 4) Tap the Sensor Pad Toggle button to activate the Sensor Pad (the toggle button will turn blue).
- Page 14 PAUSING AND RESTARTING THE SENSOR PAD: • If you remove baby from the crib, e.g. for feeding or comforting, Pause Sensor Pad remember to pause the Sensor Pad. That can be done from the Parent Unit by tapping the screen and then tapping the Sensor Pad Pause Icon in the upper left...
- Page 15 IF YOU HEAR NO SOUND: • Check that both units are powered ON. • Check that Parent Unit is not on MUTE. • Check the battery on the Parent Unit (recharge it if necessary). • Bring the Parent Unit closer to the Camera. IMPORTANT To avoid feedback (whistling), keep both units at least 3 meters / 10 feet apart.
-
Page 16: Step 5 - Activating And Deactivating Additional Functions
YOU ARE NOW READY TO USE YOUR MONITOR The Angelcare® monitor can be used with the pre-programmed factory settings or you can also customize your settings to your preference. DEFAULT SETTINGS Parent Unit Volume: Level 3 (of 4) NU Speaker Volume:... - Page 17 TO TURN VOX ON Vox sensitivity allows you to determine the sound level needed to trigger sound transmission to the Parent Unit. This means that sound will only transmit based on the level that you set. 1) Tap the screen anywhere to bring up the menu.
- Page 18 5.2 - TWO WAY TALK Your parent monitor is equipped with Two Way Talk. This feature allows you to talk to baby without being in the nursery. Tap and hold the microphone icon to activate the microphone of your PU and talk to your baby.
- Page 19 5.3 - ROOM TEMPERATURE DISPLAY TO CHANGE FROM FAHRENHEIT TO CELCIUS: 1) Tap the screen anywhere to bring up the menu. 2) Tap the Settings Icon 3) Tap the Temperature Icon to enter the temperature settings menu. 4) Tap the Edit Icon to enter the temperature unit setting.
- Page 20 TO SET THE ROOM TEMPERATURE RANGE: 1) Tap the screen anywhere to bring up the menu. 2) Tap the Settings Icon 3) Tap the Temperature Icon to enter the temperature settings menu. 4) Tap the Edit Icon to enter the temperature alarm setting menu.
- Page 21 For model AC410, AC510, please skip to Step 1. For model AC417, AC517: When your Angelcare baby monitoring system is set up and everything is turned on, the Sensor Pad has begun monitoring for movement. If no movement is detected within 20 seconds an alarm will sound and an alert icon will appear on the Parent Unit.
- Page 22 5.5 - HOW TO CHANGE DATE 1) Tap the screen anywhere to bring up the menu. 2) Tap the Settings Icon 3) Tap the Settings Icon to enter the general settings menu. 4) Tap the Edit Icon to access the date settings menu.
- Page 23 TO TURN ON MOVEMENT AND TEMPERATURE MONITORING: NOTE: Model AC417, AC517 should be defaulted to ON. Model AC410, AC510, you will need to turn monitoring ON. IMPORTANT Before turning on the movement and temperature monitoring, ensure you have set the date and time in sections 5.1 and 5.2.
- Page 24 5) Tap the Monitoring Toggle button to switch the monitoring function ON/OFF (the toggle button will turn blue when ON). 6) Tap the Save Icon at the bottom of the screen (Icon will turn blue) to confirm. NAVIGATING MOVEMENT AND TEMPERATURE REPORTS: 1) Tap the screen anywhere to bring up the menu.
- Page 25 3) Tap the Settings Icon to enter the general settings menu. 4) Tap the Edit Icon to access the monitoring settings. 5) Tap the Bin Icon to access the graph delete menu. 6) Tap the Bin Icon to delete previously saved graph data.
-
Page 26: Step 6 - Adding Accessories
5.9 - LCD SCREEN BRIGHTNESS Allows you to adjust the LCD screen brightness on the Parent Unit. 1) Tap the screen anywhere to bring up the menu. 2) Tap the Brightness Icon 3) Tap to decrease / increase the brightness level. 4) Tap again the Brightness Icon return to the Main Menu. - Page 27 6.2 - ADDING AN ACCESSORY CAMERA If you have purchased an Accessory Camera, please follow the steps below to add it to the system. 1) Tap the screen anywhere to bring up the menu. 2) Tap the Settings Icon 3) Tap the Pairing Icon to enter the device pairing menu.
-
Page 28: Troubleshooting
TROUBLESHOOTING TAKING CARE OF YOUR RECHARGEABLE BATTERIES • Ensure that you fully charge your battery for 8 hours before its first use. • To maintain maximum battery life it is recommended that you fully discharge your battery periodically. If your Parent Unit is not in use, please turn it OFF. FALSE ALARMS •... -
Page 29: Limited Warranty
WE ARE NOT IN ANY WAY RESPONSIBLE FOR period. Angelcare® will bear the cost of repairing or ANY OUTCOME RESULTING FROM THE USE OF replacing the product and shipping it back to you. - Page 30 www.angelcarebaby.com...