Setting Up The Parent Unit - Angelcare AC127 Owner's Manual

1- SETTING UP THE PARENT UNIT

1
2- SETTING UP THE SENSOR PAD
The Sensor Pad is designed to detect subtle baby movements on the surface of the
mattress.The alarm will only sound if NO movement is detected for 20 seconds.
3
2
1
2
Correct positioning
for slatted base
Charge the Parent Unit
10 hours prior to first use
10H
Regular charging time is
8 hours
1. Remove the battery cover
and insert the battery face
with + face up
2. Replace the battery cover,
align 2 dots and click to
secure
3. Remove the mattress from
the cot, place Sensor Pad
- Angelcare® logo
side up - on base in
approximate centre of
mattress. It should be
centred on the hardboard
if your cot requires a
hardboard support (see
'IMPORTANT' note below)
4. Replace the mattress
E
N
5