Angelcare AC527 User Manual page 13

LOSS OF CONNECTIVITY BETWEEN THE NURSERY UNIT AND PARENT UNIT
If your Nursery Unit becomes un-paired from your Parent Unit, please follow the steps below to re-pair them.
1. Turn ON the Parent Unit and keep the Nursery Unit OFF.
2. Press Main Menu button.
3. It will directly jump to General setting menu. Press
the Pairing Icon.
4. In the Pairing Menu, press Nursery Unit 1 Icon.
• If Nursery Unit 1 is marked as connected
it to go the Nursery Unit 1 Pairing option. You will now
need to remove it by pressing the red icon.
The linking icon will appear on the screen until
Successful Pairing Icon
You'll now be able to proceed with step 4.
5. The Linking Icon will appear on the screen.
6. Turn ON the Nursery Unit and press and hold its
"pause/pairing" button until the temperature
indicator starts blinking while pairing.
7.
If the connection has been made, the Green
Successful Pairing Icon
and the menu will show the OK Paired Icon.
8. Otherwise, the Red Failed Pairing Icon
on the screen. You will need to try again.
LOSS OF CONNECTIVITY BETWEEN THE SENSOR PAD AND THE NURSERY UNIT
If your Sensor Pad becomes un-paired from your Parent Unit, please follow the steps below to re-pair them. In order
to reconnect your Sensor Pad to your Nursery Unit, you need to make sure the Nursery Unit is paired with the Parent
Unit first.
1. Remove the battery of the Sensor Pad.
Note: If you have two Sensor Pads, you will need to
remove the battery from both of them first and then
follow the steps below.
2. Press Menu icon.
3. Press the General setting menu.
4. Press the Pairing Icon.
5. In the Pairing Menu, press Sensor Pad 1 Icon.
• If Sensor Pad is marked as connected
press it to go the the Sensor Pad Pairing option.
You will now need to remove it by pressing the
red icon . The linking icon will appear on the
screen until Successful Pairing Icon
on the screen. You'll now be able to proceed
with step 5.
6. Insert the battery into the Sensor Pad. It will
automatically activate it.
7.
If the connection has been made, the Green
Successful Pairing Icon
screen and the menu will show the OK Paired
Icon.
8. Otherwise, the Red Failed Pairing Icon
appear on the screen. You will need to try again.
press
.
appears on the screen.
will appear on the screen
will appear
appears
will appear on the
will
3
3 MIN
4
6
3
ON ON
4
3 MIN
5
6
2 4
13
E
N