Adding Accessories; Troubleshooting - Angelcare AC510 Owner's Manual

STEP 6 ‑ ADDING ACCESSORIES
Your Angelcare monitor allows you to add additional Cameras or a wired Sensor Pad.
Please contact your local distributor to see what is available in your country.
IMPORTANT
• If you have a Sensor Pad connected to your Angelcare Monitor, it can ONLY be paired
with Camera 1. The alarm on the Parent Unit will only sound if Camera 1 is selected or
in split view. If another Camera is selected only the Camera 1 will sound the alarm.
• You will only be able to hear audio from one camera at a time. When in split screen,
the sound transmitted from the Parent Unit will be from the Camera number
highlighted in the info bar.

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 9 hours before its first use.
• To maintain maximum battery life it is recommended that you fully discharge your battery periodically.
If your Parent Unit is not in use, please turn it OFF.
LOSS OF CONNECTIVITY BETWEEN THE CAMERA AND PARENT UNIT
• If your Camera becomes un‑paired from your Parent Unit, please follow the steps below to re‑pair them.
18°C
2
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Camera to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Camera to see if you get sound.
• Charge the Parent Unit.
18°C
4
1) Tap the Settings icon
2) Tap the Pairing icon
3) Tap the Trash can icon
Camera 1. If the Trash can icon
the icon
3
4) Press and hold the Pause / Pairing button on the
top right of the Camera for 2‑3 seconds.
5) When the Trash can icon
paired.
4) Tap on the blue Magnifier icon
return to normal viewing mode. Zoom
is deactivated.
in the video display view.
to enter the device pairing menu.
to delete the paired
to pair the Camera 1.
The Parent Unit Power Indicator
will flash to indicate it's in
linking mode.
appears, the Camera is
to
appears, then tap
E
N
61