Adding Accessories; Troubleshooting - Angelcare AC310 Owner's Manual

STEP 6 - ADDING ACCESSORIES
Your Angelcare monitor allows you to add additional Cameras or a Wired Sensor Pad. Please contact your local
distributor to check availability in your country.
IMPORTANT
• If you have a Sensor Pad connected to your Angelcare Monitor, it can ONLY be paired with Camera 1. The
alarm on the Parent Unit will only sound if Camera 1 is selected or in split view. If another Camera is
selected only the Camera 1 will sound the alarm.
• You will only be able to hear audio from one camera at a time. When in split screen, the sound transmitted
from the Parent Unit will be from the Camera number highlighted in the info bar.

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 9 hours before its first use.
• To maintain maximum battery life it is recommended that you fully discharge your battery periodically.
If your Parent Unit is not in use, please turn it OFF.
LOSS OF CONNECTIVITY
• If your Camera becomes un-paired from your Parent Unit, please follow the steps below to re-pair them.
18°C
18°C
6
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Camera to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Camera to see if you can hear sound.
• Charge the Parent Unit.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Recharge the Parent Unit.
1) Select the pairing settings menu and then
to access it.
2) Press the down arrow
CAMERA (the Edit icon will turn to blue). Press
paired camera as the Trash icon appears, and then Press
to confirm. The + icon will appear, then Press
camera.
3) Plug in and turn your Camera ON.
4) Press and hold the Pause / Pairing button on the top right of the
Camera for 2-3 seconds.
5) When the Trash can icon
is now paired.
3
once and press
The Parent Unit Power Indicator will
flash to indicate it's in linking mode.
shows up, the Camera
to select/highlight
to delete the
to re-pair the
13
E
N