Adding Accessories; Troubleshooting - Angelcare AC327 Owner's Manual

Hide thumbs Also See for AC327:
Table of Contents

Advertisement

ALERTS ICONS
1
1
1
Sensor Pad alert: If after 20 seconds
1
there is NO movement detected both the
Parent Unit and Nursery Unit speakers will
emit loud consecutive beeps - this is the
movement alarm
Sensor Pad is paused
2
Sensor Pad lost link: Parent Unit and
3
Nursery Unit speakers will emit loud
consecutive beeps
Note: Press any key to stop alarm and make the alert icon disappear
In the case of a Sensor Pad alarm, the monitor will Pause the Sensor Pad. In Pause mode, the
movement detection feature is disabled. To reactivate the Sensor Pad, simply un-pause the
Sensor Pad into the first menu

6- ADDING ACCESSORIES

Your Angelcare monitor allows you to add an additional Nursery Unit and Sensor Pad. Please contact
your local distributor to see what is available in your country
IMPORTANT:
• When using two Nursery Units you will only be able to hear audio from one Nursery Unit at a
time. In split screen, the sound transmitted from the Parent Unit will be from the Nursery Unit
number highlighted in the info bar
• When using two Sensor Pads with one Monitor, it is recommended that each Sensor Pad is
located in separate rooms

7- TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 8 hours before its first use.
• To maintain maximum battery life, it is recommended that you fully discharge your battery periodically. If your
Parent Unit is not in use, please turn it OFF.
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Nursery Unit to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Nursery Unit to see if you get sound.
• Charge the Parent Unit.
CFO_ANGE_Manuel_AC327_NA.indd 11
1
1
2
3
4
1
1
5
6
Parent Unit is out-of-range: Parent Unit will
4
emit 3 consecutive beeps, every 10 seconds
Temperature is too hot: Parent Unit will emit
5
3 consecutive beeps, every 5 seconds
Temperature is too cold: Parent Unit will
6
emit 3 consecutive beeps, every 5 seconds
Parent Unit battery is low: Parent Unit will
7
emit 3 consecutive beeps, every 30 seconds
E
1
N
7
11
2018-10-31 10:45 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac337Ac320

Table of Contents