Table of Contents
Advertisement
same time.
• After each adjustment, the treadmill needs to run for 1-2 minutes to verify the adjustments.
Please adjust again if necessary.
• Press the function key to stop treadmill.
CAUTION: DO NOT OVERTIGHTEN THE BELT. PLEASE MAINTAIN ORIGINAL FACTORY BELT TENSION.
EXCESSIVE BELT TENSION WILL CAUSE DAMAGE TO MOTOR.
3. Walking Belt Lubrication
• Power off the treadmill and unplug the power cord.
• Lift the edge of the walking belt and smear the inner surface with silicone oil.
• Start the treadmill to run at a speed of 3km/h (2mi/h) for 10-20 seconds.
• 5-10ml of silicone oil is required for each lubrication. Excessive silicone oil may cause slipping and
affect normal use.
• Lubricate the walking belt every three months.
20
| SAFETY INSTRUCTION
Hide quick links:
Advertisement
Table of Contents
