Maintenance And Adjustments - LifeSpan LFTM-VFOLD User Manual

VIII. MAINTENANCE AND
ADJUSTMENTS
1. Clean the treadmill
• Disconnect all sources of power before cleaning the treadmill.
• Add a small quantity of mild cleaner to a 100% cotton cloth. Do not spray the cleaner directly on the
walking belt or use acidic and corrosive cleaner.
• Do not wipe under the walking belt.
• After a period of exercise, dust and stains may appear on the rear floor. This is normal and can be
simply wiped.
2. Walking Belt Slipping and Correction
• Simultaneously press and hold both Mode Button and Speed Increase Button on the remote control
for over 3 seconds until device start.
• Front panel will show "CALI" and keep running with speed 3km/h (2mi/h).
• Walking belt goes to the left: Turn the left adjusting hole screw clockwise by 1/4 turn.
• Walking belt goes to the right: Turn the right adjusting hole screw clockwise by 1/4 turn.
• Walking belt is slipping: Turn the left and right adjusting screws clockwise for 1/2 turn at the

MAINTENANCE AND ADJUSTMENTS |

19