Automatically Setting The Clock; Adjusting The Brightness; System Settings; Setting A Sleep Timer - Sandstrom SF-DABA18 Instruction Manual

Automatically Setting the Clock

The clock will be updated automatically if you can receive DAB/FM signal in
your location.
In order to synchronise to the current local time, you must leave it on the
DAB/FM station for a period of time. It may take about 1-2 minutes to
receive the time signal.
If there is no DAB broadcast in your area, switch the unit into
FM mode to receive the time signal, or you may set the clock
manually (Refer to "Setting the Time and Date" section below).

Adjusting the Brightness

In Standby mode, press the DIMMER dial repeatedly to select the
brightness level.

System Settings

Setting a Sleep Timer

You can set a sleep timer so if you are listening to your radio and fall asleep,
it will automatically switch off at the preset time. The sleep timer can be
activated for up to a maximum of 90 minutes.
1. In ON mode, press and hold the INFO/MENU button, and then turn the
–VOLUME+/SELECT/SNOOZE dial or press the
<System>. Press the –VOLUME+/SELECT/SNOOZE dial to confirm.
2. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
to select <Sleep>. Press the –VOLUME+/SELECT/SNOOZE dial to
confirm.
3. Turn the –VOLUME+/SELECT/SNOOZE dial or press the
to select between <Sleep off>, <15 minutes>, <30 minutes>, <45
minutes>, <60 minutes> or <90 minutes>, and then press the –
VOLUME+/SELECT/SNOOZE dial to confirm.
4. When a sleep timer has been set, the "
18
button to select
" symbol will be displayed.
button
button