Related Manuals for Clarke CTC150
Summary of Contents for Clarke CTC150
- Page 1 12V TYRE INFLATOR MODEL NO: CTC150 PART NO: 7640295 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0921...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE Tyre Inflator. The CTC150 can be used for inflating car, motorcycle and bicycle tyres, inflatable sports balls and other inflatables. The compressor is not waterproof and should not be used in any wet applications. -
Page 3: General Safety Warnings
5. NEVER USE A TYRE INFLATOR WHICH APPEARS DEFECTIVE OR IS OPERATING ABNORMALLY: If the tyre inflator operates unusually or makes strange noises, switch off immediately. Arrange repairs with your CLARKE dealer. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 4: Environmental Recycling Policy
6. BEFORE USE CHECK THE TYRE INFLATOR AND HOSE FOR DAMAGE: NEVER use the tyre inflator if it is damaged. Have it repaired by your CLARKE dealer. DO NOT use if the On/Off switch does not operate correctly. 7. Keep the motor air vents clear and free from dust. - Page 5 OVERVIEW UNPACKING After removing the tyre inflator from its packaging, check that it has not been damaged in transit. Report any damage immediately to the CLARKE dealer where the item was purchased. ADAPTORS Clipped to the top of the tyre inflator are three adaptors for different uses.
-
Page 6: Working Conditions
WORKING CONDITIONS 1. Make sure that the intake air is dry and dust free. 2. DO NOT use the tyre inflator in a damp or wet environment. The compressor should only be used with good ventilation. There should be no dust, acids, vapours, explosive or flammable gases present. - Page 7 • The manufacturer set pressure is 30 PSI and this compressor has a memory function. The gauge will indicate units of measurement and measured value. 4. Press the "SET" button to choose the desired unit (PSI, BAR, KPA, kg/ 5. Press "-" or "+" button to choose the desired value.
-
Page 8: Tyre Inflation
WARNING: THE HOSE MAY BE HOT AFTER USE. REMOVE CAREFULLY. WARNING: IMPROPERLY ATTACHED HOSES OR ACCESSORIES CAN BECOME DETACHED UNDER PRESSURE AND CAUSE SERIOUS INJURY. WARNING: POSSIBLE AIR LEAKS CAN CAUSE FAULTY PRESSURE READINGS. MAKE SURE ALL CONNECTIONS ARE TIGHTLY SECURED. WARNING: THE GAUGE IS ONLY TO BE USED AS A REFERENCE, ALWAYS CARRY OUT A FINAL PRESSURE CHECK WITH A GAUGE CONFORMING TO BS EN 12645... -
Page 9: Maintenance
Never use cleaning agents or solvents as these may be aggressive to the plastic parts. Ensure that no water can get into the interior of the tyre inflator. Your CLARKE tyre inflator has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the tyre inflator to your local CLARKE dealer. -
Page 10: Component Parts
Coil spring Digital display GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. -
Page 11: Declarations Of Conformity
DECLARATIONS OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CTC150 and is the answer not in the manual?
Questions and answers