Subscribe to Our Youtube Channel
Related Manuals for Clarke CTIDG2
Summary of Contents for Clarke CTIDG2
- Page 1 DIGITAL TYRE INFLATOR MODEL NO: CTIDG2 PART NO: 5060290 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC12/23...
-
Page 2: Product Specifications
INTRODUCTION Thank you for purchasing this CLARKE Tyre Inflator. The CTIDG2 can be used for inflating car, motorcycle and bicycle tyres. The tyre inflator is not waterproof and should not be used in any wet applications. Before attempting to use the product it is essential that you read this manual thoroughly and carefully follow all instructions given. -
Page 3: General Safety Warnings
4. NEVER use this product if it appears defective or is operating abnormally: If the tyre inflator operates unusually or makes strange noises, switch off immediately. Arrange repairs by your CLARKE dealer. 5. NEVER attempt any repairs yourself. If you have a technical problem contact your local CLARKE dealer. -
Page 4: Environmental Recycling Policy
6. NEVER throw the product away with household waste or allow it to fall into a fire. AIRLINE SAFETY PRECAUTIONS 1. Compressed air can be dangerous. Ensure that you are thoroughly familiar with all precautions relating to the use of compressors and a compressed air supply. - Page 5 PREPARATION FITTING THE BATTERIES The inflator requires 2 x AAA batteries. If the voltage of the batteries falls below 2.6 volts, the battery icon will flash continuously until it shuts down. If the voltage of the batteries falls below 2.5 volts the LOW “LO” battery icon appears while the power is on and then shuts down automatically.
-
Page 6: The Display Panel
2. Ensure all fixed air connections are properly sealed using PTFE tape or pipe sealant. AIRLINE ACCESSORIES AND EQUIPMENT An extensive range of airline equipment is available from your CLARKE dealer including hoses, retractable hose reels, filter/regulators, in-line regulators, pressure gauges and safety goggles. -
Page 7: Operation
OPERATION Under or over inflated tyres are dangerous. Consult the vehicle owners handbook before using this tyre inflator. Never exceed the maximum pressure of the tyre. 1. Remove the dust cap from the tyre valve and check that the tyre valve is clean before connecting. -
Page 8: Care And Maintenance
Recoil hose (available in 7.6 and 15 mtr lengths) Hose reels Airline fittings such as filters, regulators, connectors See also the extensive range of CLARKE compressors and air tools. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... -
Page 9: Component Parts
COMPONENT PARTS Description Description Rubber sleeve Trigger Battery cover Trigger valve assembly Valve housing Main body Transparent cover Air hose assembly Button Battery housing Circuit board support Battery (AAA) Printed circuit board Air nozzle Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com... - Page 10 DECLARATION OF CONFORMITY - UK Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
-
Page 11: Declaration Of Conformity (Ce)
DECLARATION OF CONFORMITY - CE Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the CTIDG2 and is the answer not in the manual?
Questions and answers