Advertisement
PARTS REQUIRED:
x1
3/8 x 48 x 76" (1 x 121,9 x 193 cm)
Ensure your wall frame is square by installing one panel and squaring frame.
2
Place (1) 48" x 76" panel on wall frame as shown.
Use the GAA gauge block to mark the 3/4" measurement on the wall stud.
Secure panel with (2) 2" nails in the corners (Fig. A).
3
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side
until you have a 3/4" measurement on the wall stud.
Secure corners with (2) 2" nails (Fig. B).
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
For squareness maintain flush and
3/4" measurement along panel edge.
BEGIN HERE
48"
(121,9 cm)
Flush
(30,5 cm)
Flush
12' WALL - NO DOOR
Install all panels with the primed side facing up.
3/4"
(1,9 cm)
6"
(15,2 cm)
12"
2"
(5,1 cm)
Nails
3/4"
GAUGE
BLOCK
3/4"
(1,9 cm)
3/4" GAUGE
BLOCK
20
x45
2" (5,1 cm)
2 Nails
Fig. A
3/4"
(1,9 cm)
Fig. B
3/4"
(1,9 cm)
2 Nails
Advertisement
