Advertisement
PARTS REQUIRED:
3/4" GAUGE
BLOCK
Install (2) 48" x 76" panels on frame flush at top. Use the gauge block GAA to maintain a 3/4" measurement
2
on the wall stud. Panels will overlap the frame approximately 3-1/2" (8,9 cm) at each side.
Secure panels with 2" nails spaced 6" apart along edges and 12" inside panel.
Flush
3-1/2"
(8,9 cm)
Carefully flip the gable wall over.
FINISH
You have finished building your "A" gable wall(s).
"A" GABLE WALL
x2
Install all panels with the primed side facing up.
2" (5,1 cm)
Nails
3/8 x 48 x 76"
(1 x 121,9 x 193 cm)
For squareness maintain flush and
3/4" measurement along panel edge.
BEGIN HERE
3/4"
(1,9 cm)
6" (15,2 cm)
3/4"
Gauge
Block
Flush
23
x64
2" (5,1 cm)
Flush
12"
(30,5 cm)
3-1/2"
(8,9 cm)
Advertisement
