Advertisement
PARTS REQUIRED:
• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls,
and all around the door trim.
• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can
be easily overlooked that must be painted:
• Bottom edge of all siding and trim
• Inside of doors and all 4 edges
Note:
Prime all un-primed exterior wood before painting.
(Follow directions provided by manufacturer.)
• Install felt flush to all roof edges overlapping 3". Use minimal amount of roofing nails to hold in place.
OK to overlap at ridge.
• Install drip edge over roof felt on gable side and under roof felt on eave side (Fig. A).
• Do not use nails on side of drip edge that hangs over side of building.
• Only nail top of drip edge as shown.
Fig. A
Drip edge
PAINT & CAULK
- NOT INCLUDED -
(365,8 x 244,8 cm)
ROOF FELT
- NOT INCLUDED -
DRIP EDGE
- NOT INCLUDED -
Roof felt
Drip edge
54
Building Size
Building Paint
12 x 8'
2 Gallons
3 (7,6 cm)
OVERLAP
Snip bottom side of drip edge and
bend over to other side of roof.
(Follow directions provided by manufacturer.)
(365,8 x 244,8 cm)
Trim Paint
Caulk
1 Quart
3 Tubes
Flush
Flush
Edge flush
to trim.
Building Size
Drip Edge
12 x 8'
50'
(15,2 m)
Advertisement
